Concrete / Mortar

 

Kwik Mix Stone Mix

Stone Mix

A perfectly proportioned blend of high quality Portland Cement, clean concrete sand, and dry, crushed aggregate.

Kwik Post Kwik Post

A perfectly proportioned blend of high quality Portland Cement, Concrete Sand, dry crushed aggregate and a special set accelerator

Sakrete Concrete Mix

SAKRETE Concrete Mix

Pour a concrete slab or set a post in your own backyard! Use SAKRETE Concrete Mix, a high quality mix that provides strength and durability for new construction or repairs to existing concrete.

Sakrete Sand Mix

SAKRETE Sand Mix

Overlay damaged concrete or create a bedding for flagstone, slate or brick! Use SAKRETE Sand Mix, a high quality mixture of sand and cement.

Sakrete PSI 6000

SAKRETE PSI 6000

Construct sidewalks, slabs, steps or patios! Use SAKRETE PSI 6000, a high-strength, crack-resistant, air-entrained concrete mix.

Sakrete Flo-Coat

SAKRETE Flo-Coat

Rejuvenate old concrete surfaces! Use SAKRETE Flo-Coat, a polymer-modified, flowable, resurfacing material, as an alternative to expensive concrete replacement.

Sakrete Top `N Bond

SAKRETE top’n bond

Make old concrete surfaces look new again! Use SAKRETE top’n bond, a polymer-modified, cement mixture with superior bond strength.

Sakrete Plug Tite

SAKRETE plug-tite

Stop water leaks that result from breaks in concrete! Use SAKRETE plug-tite, a quick-setting, non-shrink, hydraulic cement.

King Parging

SAKRETE Parging Mix

Parge concrete blocks or poured concrete! Use SAKRETE Parging Mix, a cement mixture designed to create superior bonding, or to smooth concrete walls.

Mortar Mix Mortar Mix

A perfectly proportioned blend of high quality type 'S' Masonry Cement clean and sharp brick sand.
Use as a Masonry binder for brick, block and stone and as a Parging Mix.

St Marys Type N

St Marys Type N Masonry Cement

Medium strength for general use such as in exposed non load-bearing masonry walls above grade and in tuck-pointing.

St Marys Type S

St Marys Type S Masonry Cement

St Marys Type S Masonry Cement is recommended where a higher compressive strength is required, such as for parging, foundation walls and walls designed with reinforcement.

Stone Hold Stone Hold

Stone-hold Premium Mortar Mix is an excellent choice for today’s stone construction applications. It provides optimal bond strength while maintaining excellent workability. This formulation also improves resistance to cracking during freeze/thaw cycles.

Concrete Weld

Concrete Weld

DURA PRO AC 0616 is synthetic resin for interior or exterior use, designed to increase the bonding properties of concrete. It promotes intercoat adhesion between old and new concrete. Used as an additive to portland cement mixe, AC 0616 improves adhesion and reduce cracking in toppings, brick walls, patching or resurfacing concrete walls, floors or ramps. May also be used for stucco and plaster applications.

 

Concrete Sealer CONCRETE SEALER (Solvent Based)
  • for: Coloured Slab, Imprinted or Stamped Concrete
  • High Acrylic Solids / Premium long-lasting protection
  • Helps protect against stain penetration, salt, dirt, UV rays & acid rain
  • Gives wet look - Medium Gloss
  • Wears evenly*
  • Restores & enhances colour
  • Available in 3.78 L and 18.9 L sizes
STONESAVER Concrete Sealer protects your concrete against harsh pool chemicals, colour fading UV rays, dirt, salt, grease, oil and rust stain penetration.
Paver Sealer PAVING STONE SEALER (Solvent Based)
  • Highest Acrylic Solids / Premium long-lasting protection
  • Gives wet look / High Gloss
  • Protects against oil, salt and dirt
  • Restores and enhances colour
  • Will not peel and wears evenly*
  • Available in 3.78 and 5 Gallon sizes
STONESAVER Paving Stone Sealer provides the best possible protection for your paving stones and exposed aggregate concrete against harsh pool chemicals, colour fading from UV rays, dirt, salt, grease, oil and rust stain penetration.
Low Gloss Sealer PENETRATING LOW GLOSS SEALER
  • For Paving Stones and Concrete
  • Gives wet look / Low Gloss
  • One Coat Application / Low Slip Factor
  • Ideal for Pool Decks and Sloped Driveways
  • Restores and enhances colour
  • Protects against oil, salt and dirt
  • Will not peel and wears evenly
  • Available in 3.78 L and 18.9 L sizes
STONESAVER Penetrating Low Gloss Sealer provides the best possible protection for your paving stones and concrete surfaces against harsh pool chemicals, colour fading from UV rays, dirt, salt, grease, oil and rust stain penetration.
CPD Cure & Seal

Cipadeck Cure & Seal WB

CIPADECK Cure & Seal WB is a clear water based acrylic curing, sealing, and dustproofing compound for concrete.